Acer Aspire Revo 3610

closeHey, just so you know ... this post is now about 13 years and 10 months old. Please keep that in mind as it very well may contain broken links and/or outdated information.

My Dell OptiPlex Linux server was getting louder and hotter in its old age. For the past three years it has been running 24×7 as my media server in the closet. The fan in the power supply had started to whine (especially when the CPU was maxed), and I already lost one hard drive to a crash earlier in the year. I decided it was time to replace it and started looking for smaller, quieter, more power-efficient alternatives.

I call this box a server because it hosts this blog, a small Gallery site, some home media applications for my TiVos, and is running all the time, but I don’t need a server-class machine. My past Linux machines have traditionally been older desktops, even a laptop! So the latest crop of nettops seemed like an ideal solution.

After researching products like the Asus EeeBox, the MSI WindBox, and even the Dell Studio Hybrid I decided on the Acer Aspire Revo 3610. This little box packs in Intel’s dual-core Atom N330  CPU (1.60GHz), 2gb of RAM, nVidia’s ION graphics chipset, and a 160gb hard drive. Peripherals and storage can be connected via the 6 USB ports (one of which is used for the included wireless keyboard a mouse), the eSATA connector, and the SD card reader, and network connectivity includes a gigabit network connection and B/G/N wireless. The Revo has no optical drive, but experience with my EeePCs has made me comfortable with booting/installing from other removable media like USB thumb drives, so no biggie there. Also, since I’m not using the Revo as an HTPC I won’t be using the HDMI or digital audio (SPDIF) connections, but they’re there. The Revo comes with Windows 7 Home Premium pre-installed (although I wish Acer sold a cheaper version without it). If you’re going to use it as an HTPC it comes with a mounting plate so you can attach it right to the back of your HDTV.

My plan was always to put the latest version of Ubuntu on the box. Warranties be damned! After unpacking my new Revo, before even turning it on, I immediately cracked it open, thinking I would make an image backup of Windows 7 just in case (since it comes without a rescue disc). Unfortunately, even with my lack of fear for warranty-voiding, removing the hard drive involved more steps than I was willing to take. So rather than wiping the drive and starting clean, I booted Windows 7, did some initial setup, and then shrunk the primary partition so I could dual-boot Windows 7 and Ubuntu. Considering the current server only had a 30gb hard drive in it (and most of my media is on external NASes), having a 60gb partition for Ubuntu was acceptable to me.

Installing Lucid Lynx didn’t go as smoothly as I anticipated, however. The 64-bit version (imaged onto a 2gb USB stick) wouldn’t even boot correctly and the 32-bit version would start and then complain it couldn’t find the CD-ROM. After figuring out how to manually boot the installer from the command-line, I found this blog post that helped me get through the rest of my installation issues. Shortly, I had my Revo set up as a 64-bit Linux server!

It took me a few days to get everything transferred from the old server to the Revo and then get everything set up and configured the way I wanted. So far I am very impressed with the Revo. It’s very quiet, even when both cores are busy (i.e., folding a work unit and transcoding a video file), and my UPS utilization dropped from 29% to 10%! That’s a serious cut in power consumption. I have noticed a slight performance decrease over the old Pentium 4 Dell, but nothing major and it was expected. It’s well worth the trade-off for the reduced noise and power usage, though!

Out with the old, in with the new!

2 Comments

  1. I finally upgraded the hard drive in my Revo … I swapped out the Hitatchi 160gb 5400RPM hard drive with a 160gb Intel SSD. Removing the drive is pretty simple, so I’m not sure why I was so worried about it when I first got it. I used Clonezilla to copy the HDD to the SSD and everything booted normally. Removing a large heat source should help with the fan speed and keep the box cooler and quieter.

    I also bumped it up to 3gb of RAM. I tried going to 4gb but the box was unstable and kept crashing, so 3gb it is.

Leave a Reply

Your email address will not be published. Required fields are marked *